Recommended PSI is 6-7

Unpacking and Inflating

• The simplest part! Just open the bag, pull out the Sunchill and attach your pump.
• To assemble the pump, screw on the handles and the base and screw the hose onto the INFLATE side of the pump.
• Connect the pump nozzle to the Sunchill and make sure the pin in the valve of the Sunchill is out, meaning not pushed in. Recommended PSI is 6. 
• There is a D-ring next to the valve that you can use to tie off the Sunchill to your dock or boat and enjoy. This D-ring is NOT designed for towing.

Deflating and Repacking

• To deflate, open the valve and push the pin in, the pin will stay in and the air will rush out. The initial burst of air will release a lot of air, the rest will come out when you fold up the Sunchill. While not required, you can also use your pump to deflate the Sunchill. Screw the pump hose into the side of the pump that says DEFLATE. You can then pump all the air out of the Sunchill for the smallest package possible. 
• To roll back up, it's simple, HALF, HALF, THIRDS. Simply fold the Sunchill in half, then half again, and finally in thirds. You'll end up with a pizza slice that fits nicely inside the bag. If that doesn't make perfect sense, here is a quick video link demonstrating the best way to fold it up.

Drink Holders

• In the bag you will find two strap-around Sunchill drink holders. Each drink holder is designed to fit a normal 12oz can with a koozie on it. They also have some stretch to fit bigger things like 20-oz tumblers. Additional drink holders are available at sunchill.com/holdmybeer

Maintenance

• Your Sunchill is a maintenance free product. There is no requirement to hose it off or wipe it down after use. That said, you may find that you prefer to give it a rinse every once in a while and let it air dry vs always stuffing it back in the bag straight from the water. Both ways are fine, it's totally up to the user.

Write content to help your customers to better understand your products or policies.

Write content to help your customers to better understand your products or policies.

The recommended PSI for the Partychill is 9 PSI

• To fold up the Partychill, the first step is to deflate it, whether that is with a pump, with time, or by pushing the air out. Once it is mostly deflated, you can fold the two circles on top of each other and now you just have a "double Sunchill" and fold like the video, in half, half again, and then in thirds. You end up with a flat rectangle that slides right into the bag.

• The optional Jellynet is designed to keep jellyfish out of your Sunchill. The top of the net cinches around the top edge of the Sunchill and is kept tight by a Cam Jam. It is easiest to attach by flipping the Sunchill upside down and sliding the net around the edges, then cinching the top line tight with the Cam Jam. 
• I have made a quick video demonstration the best way to attach it. You can watch it on YouTube. 

Write content to help your customers to better understand your products or policies.

Write content to help your customers to better understand your products or policies.